Flitch

Flitch Veneers
The World's Largest Selection of Fine Veneers

Your Choice of Standard or Extra Long Monarch Sizes
Our standard veneers are 1/40" to 1/32" thick, 36" long and range in width from 4" to 12".

Monarch veneers run approximately 7" and wider by 7 feet and longer. These are the veneers usually gobbled up first by the architectural and furniture trades. They are cut from prized logs, with every sheet kept in consecutive order, so you can use them one after another for a perfect match in color, figure and texture. They are ideal for covering large expanses like table tops, cabinets and doors. Using them can save as much as two thirds of the time you would otherwise spend jointing, butting and taping shorter lengths to cover large surfaces.

All of our Flitch Veneers are Sold by the square foot, we cannot guarantee specific sizes, however if you require a specific size, please note the size in the Special Instructions box during checkout, we will fill your size requirements as close as possible.

Calculating square footage: Square footage can be calculated with the following formula:
Sq. ft. = Length (in inches) x width (in inches) divided by 144.
Example: A piece of veneer that measures 6" wide and 3 feet long would be calculated as follows: 6 x 36 =216 divided by 144 = 1.5 This piece of veneer measures a total of 1-1/2 square feet.